When was the metric system introduced in Russia? Creation and development of the metric system of measures How did the metric system of measures appear

Probably, each of you has been surprised more than once by the fact that the size of the screens of digital devices is indicated in unusual units. It has even become a tradition and it never occurs to anyone to ask why not use ordinary centimeters instead of inches, which, it would seem, have long and firmly taken their place in the history textbook?

The thing is that the United States and several other countries (unlike the rest of the world) have not switched to the metric system, preferring their traditional units of measurement to international meters and kilograms. And since many of the largest technology corporations are located in the United States, the inches familiar to this country have spread in products all over the planet. After all, everyone knows in which country the city of Cupertino is located, where the head office of Apple, the company that created the first mass smartphone on Earth, is located. There are other corporations in the United States that are pushing high technology forward. And along with high technology, they are moving into the broad masses and old inches.

At the very beginning of our story, some clarity should be introduced. There is an opinion that the SI system was never approved in the USA. She is so invisible in this country that a person who does not go into too much detail can get such an impression. But it is absolutely not true! A number of acts have been adopted that approve it as the official system of weights and measures of the United States. How, then, did it happen that Americans still use the old units of measurement? The fact is that all the adopted acts are advisory (rather than mandatory) for private business and ordinary residents of the country. And this means that every American has the right to measure in familiar inches and weigh in pounds familiar from childhood. And this right is used not only by people, but also by giant corporations.

USA, Liberia and Myanmar. Three strongholds of ancient units of measurement

There are only three countries in the world that have not yet switched to the SI system. These are the USA, Liberia and Myanmar (until 1989 - Burma). The rest of the peoples of the world either switched to the metric system completely, or at least officially accepted it as a standard. Another thing is how things are with the people. In Russia, even now they can call a kilometer “verst” in conversation, but at the same time everyone clearly understands that we are talking about the most ordinary metric kilometer, and not about the old Russian verst.

But in the United States, the old folk system of weights and measures is used not only in everyday life. Football fields are measured in yards. , performed by car engines, in outlandish foot-pounds. Atmospheric pressure is in pounds per square inch.

The United States uses the U.S. instead of the international SI system. Customary System (Traditional US System). It includes more than three hundred units of measurement of various physical quantities. The difficulty lies in the fact that many of these units of measurement are called the same, but at the same time they mean completely different things.

Let's give the simplest and most understandable to every person, even very far from engineering wisdom. It would seem that what can be difficult in a ton? This is a thousand kilograms and nothing else! But in the US, there are at least nine definitions of the concept of "ton": short ton (short ton), displacement ton (displacement ton), frozen ton (refrigeration ton), nuclear ton (nuclear ton), cargo (freight) ton (freight ton) , register ton, metric ton, assay ton, fuel ton or ton of coal equivalent.

And despite all these obvious difficulties, neither in business nor in everyday life in the United States is a simple, understandable and unambiguous metric system used. The reasons for this lie, as often happens, in the history of this country.

The attitude of the United States to the metric system at first was determined by relations with France

In the colonies of Britain, the British Imperial System (British Imperial System) was used. At the end of the 18th century, the metric system was developed in France. Which, of course, neither Britain itself nor its colonies accepted.

When the United States gained independence, attempts were made in the country to streamline the system for measuring quantities. But they ran into, as is often the case, the financial issue. Thomas Jefferson, who served as US Secretary of State under George Washington, favored the decimal system. But it turned out that it would be impossible to determine the metric units of length without sending a delegation to France. And it was a costly business.

Relations with France, which had supported the United States in its struggle for independence, entered a cooling phase after 1795. When in 1798 France invited representatives of various countries to familiarize themselves with the metric system, the Americans were faced with a dismissive attitude towards themselves.

And yet, representatives of the United States visited Paris and were delighted with the metric system. But the likelihood of convincing the country's leaders of the need to switch to a new system of weights and measures coming from France was very weak. In 1821, US Secretary of State John Quincy examined the units of measurement for 22 states and concluded that the U.S. The Customary System is fairly unified and doesn't need to be changed.

Napoleon reigned in France, and the Americans had doubts that the French themselves would remain faithful to the system of weights and measures they had created. As a result, the consideration of the metric system in the United States at this historical stage ceased. But this does not mean that they did not return to it again and again as the SI system gained more and more recognition in various parts of our vast world.

US decides to adopt the metric system

In 1865, the American Civil War ended. The Americans looked around and found that most of the countries of Europe had switched to the decimal metric system. And this obvious fact in the United States could no longer be ignored. In 1866, the country's Congress passed an act according to which the metric system became official for use in all contracts, transactions and lawsuits.

Nine years later, France brought together representatives of the leading countries of the world to discuss the details of the new international version of the metric system. The United States received an invitation and sent its delegation. Representatives of these countries signed an international convention, establishing the International Bureau of Weights and Measures and the International Committee of Weights and Measures, whose tasks included reviewing and adopting changes.

The agreement provided for the creation of a special hall in the French city of Servais near Paris, where standards of metric standards, in particular the standard of the meter, should be placed. This made it possible to avoid difficulties in understanding by different peoples what exactly is meant by one or another unit of measurement.

In 1890, the United States received copies of the international standard for the meter and the international standard for the kilogram. Under the Mendenhall Order (named for the Superintendent of Weights and Measures), metric units were accepted as the fundamental standard for length and mass in the United States. A yard was defined as 3600/3937 meters and a pound as 0.4535924277 kilograms.

In 1959, English-speaking countries made some adjustments: 1 yard was equal to 0.9144 meters, and 1 pound to 0.4535923. That is, formally, the United States has already adopted the metric system as the standard for measures and weights for 145 years, and for about 120 years everything in this country should have been measured in meters and kilograms. But, as practice shows, making a decision does not mean its implementation in real life.

Metric system in the USA today

Many prominent US scientists and politicians were supporters of the obligatory metric system for the entire country. In 1971, it began to look like the United States would finally be among the countries that adopted the metric system. The National Bureau of Standards released the Metric America report recommending the country switch to the metric system within ten years.

In 1975, the Metric Conversion Act was passed by Congress, the essence of which was the same as the recommendations of standards specialists, but with only two important differences. Rigid time frames were not set, and the transition to the metric system itself assumed voluntariness. As a result, the country's schoolchildren began to pass the SI system, and some companies attempted "metrification", which turned into fruitless propaganda, since there were no real actions to switch to metric units of measurement.

It turned out that in the United States units of measurement are used, which are already forgotten in the rest of the world. An increasing number of consumers of American products began to demand that the goods supplied be accompanied by a specification in the metric system. As American companies opened more and more manufacturing facilities in Europe and Asia, it became necessary to decide which units to use: metric or traditional American.

Recognizing these complexities, in 1988 Congress amended the Metric Conversion Act to make the metric system the "preferred system of weights and measures of the United States for trade and commerce." As of late 1992, federal agencies were required to use metric units when measuring quantities related to purchases, grants, and other matters related to business activity. But these instructions concerned only state structures. Private business remained free to use the usual system of measurement. Attempts have been made to interest small businesses in the metric system, but little progress has been noted.

Today, only about 30% of products manufactured in the USA are “metrified”. The pharmaceutical industry in the United States has been referred to as "strictly metric" because all specifications of the country's pharmaceutical products are reported exclusively in metric units. On drinks there are designations both in metric and in traditional for the USA systems of sizes. This industry is considered "soft metric". The metric system is also used in the US by film, tool and bicycle manufacturers. Otherwise, in the USA they prefer to measure the old fashioned way. In ancient inches and pounds. And this applies even to such a young industry as high technology.

What prevents a highly developed industrial country from switching to a system of measures and weights generally accepted on our planet? There are a number of reasons for this.

Conservatism and costs hinder the transition to the metric system

One of the reasons is the costs that would have to be incurred by the country's economy in the event of a transition to the SI system. After all, technical drawings and instructions for the most complex equipment would have to be reworked. This would require a lot of work of highly paid specialists. And, therefore, money. For example, NASA engineers reported that converting Space Shuttle blueprints, software, and documentation to metric units would cost $370 million, about half the cost of a typical Space Shuttle launch.

But the high costs of transition alone cannot explain the cool attitude of Americans towards the metric system. Psychological factors play their own, and by no means the last, role in holding back the country's transition to the international system of weights and measures. The stubborn conservatism of Americans makes them resist any innovation, especially those that come from foreigners.

Americans always like to do things their own way. Individualism is the main feature of the representatives of this people. The descendants of the conquerors of the boundless expanses of the Wild West stubbornly reject attempts to force them to abandon the inches and pounds familiar since childhood.

No high technology can force a person to reconsider his conservative views. For example, commercial. But really only in the early 1980s. Events happen only when the consciousness of the average person is ready to accept them. And this, in turn, is possible only if a person sees the meaning in it. And the average American simply does not see much sense for himself personally in the metric system.

Therefore, all efforts to introduce the metric system in the United States run into the impregnable stronghold of the everyday life of ordinary citizens of the country who do not want to let meters and kilograms go there. There is another important reason, which we talked about a little earlier. A significant part of the largest corporations in the world are located in the United States. Their products are competitive in the world market even in unusual inches and pounds. What's unusual! The whole world will be very surprised if one day the screen size of the next smartphone will be indicated in centimeters familiar from the school bench, and not in inches, which would seem to have descended from the pages of a history textbook. And this means that Americans have no reason to abandon their traditional system of weights and measures.

Sourced from science.howstuffworks.com

Metric system

Regions that do not use the metric system are marked in red

Metric system is the common name for the international decimal system of units based on the use of the meter and the gram. Over the past two centuries, there have been various versions of the metric system, differing in the choice of basic units. Currently, the SI system is internationally recognized. With some differences in details, the elements of the system are the same all over the world. Metric units are widely used around the world both for scientific purposes and in everyday life.

The main difference between the metric system and the traditional systems used earlier is the use of an ordered set of units of measure. For any physical quantity, there is only one main unit and a set of submultiples and multiples, formed in a standard way using decimal prefixes. This eliminates the inconvenience of using a large number of different units (such as inches, feet, fadens, miles, etc.) with complex conversion rules between them. In the metric system, the conversion is reduced to multiplying or dividing by a power of a number, that is, to a simple permutation of the comma in a decimal fraction.

Attempts were made to introduce metric units to measure time (by dividing the day, for example, by millidays) and angles (by dividing the revolution by 1000 milliturns or by 400 degrees), but they were not successful. Currently, the SI system uses seconds (divided by milliseconds, etc.) and radians.

Story

The metric system grew out of the decrees adopted by the National Assembly of France in and from the definition of the meter as one ten-millionth of the section of the earth's meridian from the North Pole to the equator.

19th century

By defining the meter as a ten-millionth part of a quarter of the earth's meridian, the creators of the metric system sought to achieve the invariance and exact reproducibility of the system. They took the gram as a unit of mass, defining it as the mass of one millionth of a cubic meter of water at its maximum density. To facilitate the use of new units in everyday practice, metal standards were created that reproduce these ideal definitions with the utmost accuracy.

It soon became clear that metal standards of length could be compared with each other, introducing a much smaller error than when comparing any such standard with a quarter of the earth's meridian. In addition, it became clear that the accuracy of comparing metal mass standards with each other is much higher than the accuracy of comparing any such standard with the mass of the corresponding volume of water.

In this regard, the International Commission on the Meter decided to take the “archival” meter stored in Paris “as it is” as the standard of length. Similarly, the members of the Commission took the archival platinum-iridium kilogram as the standard of mass, “considering that the simple ratio established by the creators of the metric system between a unit of weight and a unit of volume represents the existing kilogram with an accuracy sufficient for ordinary applications in industry and commerce, and accurate science needs not a simple numerical ratio of this kind, but an extremely perfect definition of this ratio.

The new international organization immediately took up the development of international standards of length and mass and the transfer of their copies to all participating countries.

20th century

The metric system of measures was allowed for use in Russia (optionally) by the law of June 4, the draft of which was developed by D. I. Mendeleev, and introduced as a mandatory decree of the Provisional Government of April 30, and for the USSR - by a decree of the Council of People's Commissars of the USSR of 21 July .

Based on the metric system, the International System of Units (SI) was developed and adopted in 1960 by the XI General Conference on Weights and Measures. During the second half of the 20th century, most countries in the world switched to the SI system.

End of XX century - XXI century

In the 90s of the twentieth century, the widespread use of computer and household appliances from Asia, in which there were no instructions and inscriptions in Russian and other languages of the former socialist countries, but were available in English, led to the displacement of the metric system in a number of areas of technology. So, the sizes of CDs, floppy disks, hard drives, diagonals of monitors and TVs, matrices of digital cameras in Russia are usually indicated in inches.

To date, the metric system has been officially adopted in all countries of the world, except for the USA, Liberia and Myanmar (Burma). The last country to complete the transition to the metric system was Ireland (2005). In the UK and Saint Lucia, the transition to the SI has not yet been completed. In Antigua and Guyana, in fact, this transition is far from over. China, which has completed this transition, nevertheless uses ancient Chinese names for metric units. In the USA, the SI system is adopted for use in science and the manufacture of scientific instruments, for all other areas - the American version of the British system of units.

Metric variants of traditional units

There have also been attempts to slightly change the traditional units so that the relationship between them and metric units becomes simpler; it also made it possible to get rid of the ambiguous definition of many traditional units. For example:

metric ton (exactly 1000 kg)
metric carat (exactly 0.2 g)
metric pound (exactly 500 g)
metric foot (exactly 300 mm)
metric inch (exactly 25 mm)
metric horsepower (exactly 75 kgf m/s)

Some of these units have taken root; at present, in Russia, "ton", "carat" and "horsepower" without specification always denote the metric versions of these units.

Links

A Brief History of the SI
imperial and metric automatic conversions
NASA completely switches to the metric system (Russian) Compulenta -

Wikimedia Foundation. 2010 .

Metric second
Metric system of measures and weights

See what the "Metric system" is in other dictionaries:

metric system- a system of measures and weights, which has become widespread in various countries and is therefore called international. The metric system was first introduced in France in 1793. In Russia, until 1918, the metric system was allowed to be used ... ... Reference commercial dictionary

METRIC SYSTEM- METRIC, a decimal system of UNITS OF MEASURES and WEIGHTS, based on the unit of length METER (m) and the unit of mass KILOGRAM (kg). Larger and smaller units are calculated by multiplying or dividing by powers of 10. The metric system was... Scientific and technical encyclopedic dictionary

METRIC SYSTEM- (metric system) A system of measurement based on the decimal system. It first gained recognition in France at the end of the 18th century. and by the 1830s. widely spread in Europe. In the UK, bills for its mandatory introduction are not ... ... Glossary of business terms

metric system- - [A.S. Goldberg. English Russian Energy Dictionary. 2006] Topics energy in general EN metric systemMS ... Technical Translator's Handbook

metric system- metrinė sistema statusas T sritis fizika atitikmenys: angl. metric system; metrical system vok. metrisches System, n rus. metric system, f pranc. système metrique, m … Fizikos terminų žodynas

METRIC SYSTEM- METRIC SYSTEMThe decimal system of weights and measures originated in France. The basic unit of this system is the meter, approximately equal to one ten-millionth of the distance along the meridian from the equator to the pole, or approx. 39.37 inches Deals on… … Encyclopedia of Banking and Finance

METRIC SYSTEM- as applied to the measurement of the length of sound waves, cf. Foot tone... Riemann's musical dictionary

METRIC- (decimal system of measures) a system of units of physical quantities, which is based on the unit of length meter. Multiple and submultiple units of the metric system of measures are in decimal ratios. Based on the metric system of measures created ... ... Big Encyclopedic Dictionary

Back

History of the creation of the metric system

As you know, the metric system originated in France at the end of the 18th century. The variety of measures and weights, the standards of which sometimes differed significantly in different regions of the country, often led to confusion and conflicts. Thus, there is an acute need to reform the existing measurement system or develop a new one, based on a simple and universal standard. In 1790, the project of the notorious Prince Talleyrand, who later became the Minister of Foreign Affairs of France, was submitted to the National Assembly for discussion. As a standard of length, the activist suggested taking the length of a second pendulum at a latitude of 45 °.

By the way, the idea with the pendulum was not new at that time. Back in the 17th century, scientists made attempts to define universal meters based on real objects that retained a constant value. One of these studies belonged to the Dutch scientist Christian Huygens, who conducted experiments with a second pendulum and proved that its length depends on the latitude of the place where the experiment was carried out. A century before Talleyrand, on the basis of his own experiments, Huygens proposed as a world standard of length to use 1/3 of the length of a pendulum with a period of oscillation of 1 second, which was approximately 8 cm.

And yet, the proposal to calculate the length standard on the readings of the second pendulum did not find support in the Academy of Sciences, and the future reform was based on the ideas of the astronomer Mouton, who calculated the unit of length from the arc of the earth's meridian. He also owned a proposal to create a new system of measurements on a decimal basis.

In his project, Talleyrand outlined in detail the procedure for determining and introducing a single standard of length. Firstly, it was supposed to collect all kinds of measures from all over the country and bring them to Paris. Secondly, the National Assembly was to contact the British Parliament with a proposal to create an international commission of leading scientists from both countries. After the experiment, the French Academy of Sciences had to establish the exact relationship between the new unit of length and the measures that were previously used in various parts of the country. Copies of standards and comparative tables with old measures had to be sent to all regions of France. This regulation was approved by the National Assembly, and on August 22, 1790, it was approved by King Louis XVI.

Work on determining the meter began in 1792. The leaders of the expedition, which was instructed to measure the meridian arc between Barcelona and Dunkirk, were French scientists Mechain and Delambre. The work of French scientists was designed for several years. However, in 1793, the reforming Academy of Sciences was abolished, which caused a serious delay in the already difficult and time-consuming research. It was decided not to wait for the final results on the measurement of the meridian arc and calculate the dyne meter based on the data already available. So in 1795, the time meter was defined as 1/10,000,000 of the Paris meridian between the equator and the north pole. Work on the refinement of the meter was completed by the autumn of 1798. The new meter was shorter by 0.486 lines or 0.04 French inches. It was this value that formed the basis of the new standard, legalized on December 10, 1799.

One of the main provisions of the metric system is the dependence of all measures on a single linear standard (meter). So, for example, when determining the basic unit of weight - - it was decided to take as a basis a cubic centimeter of pure water.

By the end of the 19th century, almost all of Europe, with the exception of Greece and England, adopted the metric system. The rapid spread of this unique system of measures, which we still use today, was facilitated by simplicity, unity and accuracy. Despite all the advantages of the metric system, Russia at the turn of the 19th - 20th centuries did not dare to join the majority of European countries, having already broken the centuries-old habits of the people and refusing to use the traditional Russian system of measures. However, the “Regulations on Weights and Measures” of June 4, 1899 officially allowed the use of the kilogram along with the Russian pound. The final measurements were completed only by the beginning of the 1930s.

In 1795, the Law on New Measures and Weights was passed in France, which established a single unit of length - meter, equal to ten millionths of a quarter of the arc of the meridian passing through Paris. Hence the name of the system - metric.

A platinum rod one meter long and of a very strange shape was chosen as the standard of the meter. Now the size of all rulers, one meter long, had to correspond to this standard.

Units installed:

- liter as a measure of the capacity of liquid and granular bodies, equal to 1000 cubic meters. centimeters and containing 1 kg of water (at 4 ° heat Celsius),

- gram as a unit of weight (the weight of pure water at a temperature of 4 degrees Celsius in the volume of a cube with an edge of 0.01 m),

- ar as a unit of area (the area of a square with a side of 10 m),

- second as a unit of time (1/86400 of a mean solar day).

Later, the basic unit of mass became kilogram. The prototype of this unit was a platinum weight, which was placed under glass flasks and the air was pumped out - so that dust would not get in and the weight would not increase!

The prototypes of the meter and kilogram are still kept in the National Archives of France and are called "Meter Archive" and "Kilogram Archive" respectively.

There were different measures before, but an important advantage of the Metric system of measures was its decimality, since submultiple and multiple units, according to the accepted rules, were formed in accordance with the decimal count using decimal factors, which correspond to the prefixes deci, - centi, - milli, - deca, - hecto- and kilo-.

Currently, the metric system of measures is adopted in Russia and in most countries of the world. But there are other systems as well. For example, the English system of measures, in which the foot, pound and second are taken as the main units.

It is interesting that in all countries there are familiar packaging for different foods and drinks. In Russia, for example, milk and juices are usually packaged in liter bags. And large glass jars - entirely three-liter!

Remember: on professional drawings, the dimensions (dimensions) of products are signed in millimeters. Even if these are very large products, like cars!

Volkswagen Cady.

Citroen Berlingo.

Ferrari 360.

Send your good work in the knowledge base is simple. Use the form below

Students, graduate students, young scientists who use the knowledge base in their studies and work will be very grateful to you.

Hosted at http://www.allbest.ru/

International unit

Creation and development of the metric system of measures

The metric system of measures was created at the end of the 18th century. in France, when the development of trade industry urgently required the replacement of many units of length and mass, chosen arbitrarily, by single, unified units, which became the meter and kilogram.

Initially, the meter was defined as 1/40,000,000 of the Paris meridian, and the kilogram was defined as the mass of 1 cubic decimeter of water at a temperature of 4 C, i.e. the units were based on natural standards. This was one of the most important features of the metric system, which determined its progressive significance. The second important advantage was the decimal subdivision of units, corresponding to the accepted system of calculation, and a unified way of forming their names (by including the appropriate prefix in the name: kilo, hecto, deca, centi and milli), which eliminated complex conversions of one unit to another and eliminated confusion in titles.

The metric system of measures has become the basis for the unification of units throughout the world.

However, in subsequent years, the metric system of measures in its original form (m, kg, m, ml ar and six decimal prefixes) could not satisfy the demands of developing science and technology. Therefore, each branch of knowledge chose units and systems of units that were convenient for itself. So, in physics, the centimeter - gram - second (CGS) system was followed; in technology, a system with basic units has found wide distribution: meter - kilogram-force - second (MKGSS); in theoretical electrical engineering, several systems of units derived from the CGS system began to be used one after another; in heat engineering, systems were adopted based, on the one hand, on the centimeter, gram and second, on the other hand, on the meter, kilogram and second with the addition of a unit of temperature - degrees Celsius and off-system units of the amount of heat - calories, kilocalories, etc. . In addition, many other off-system units have found use: for example, units of work and energy - kilowatt-hour and liter-atmosphere, pressure units - millimeter of mercury, millimeter of water, bar, etc. As a result, a significant number of metric systems of units were formed, some of them covering certain relatively narrow branches of technology, and many non-systemic units, the definitions of which were based on metric units.

Their simultaneous application in certain areas led to the clogging of many calculation formulas with numerical coefficients not equal to unity, which greatly complicated the calculations. For example, in engineering, it has become common to use kilograms to measure the mass of the ISS system unit, and kilogram-force to measure the force of the MKGSS system unit. This seemed convenient from the point of view that the numerical values of the mass (in kilograms) and its weight, i.e. the forces of attraction to the Earth (in kilogram-forces) turned out to be equal (with an accuracy sufficient for most practical cases). However, the consequence of equating the values of essentially heterogeneous quantities was the appearance in many formulas of the numerical coefficient 9.806 65 (rounded 9.81) and the confusion of the concepts of mass and weight, which gave rise to many misunderstandings and errors.

Such a variety of units and the associated inconveniences gave rise to the idea of creating a universal system of units of physical quantities for all branches of science and technology, which could replace all existing systems and individual non-systemic units. As a result of the work of international metrological organizations, such a system was developed and received the name of the International System of Units with the abbreviation SI (International System). The SI was adopted by the XI General Conference on Weights and Measures (CGPM) in 1960 as the modern form of the metric system.

Characteristics of the International System of Units

The universality of the SI is ensured by the fact that the seven basic units underlying it are units of physical quantities that reflect the basic properties of the material world and make it possible to form derived units for any physical quantities in all branches of science and technology. The same purpose is served by additional units necessary for the formation of derived units depending on the plane and solid angles. The advantage of the SI over other systems of units is the principle of constructing the system itself: the SI is built for a certain system of physical quantities that make it possible to represent physical phenomena in the form of mathematical equations; some of the physical quantities are taken as basic and through them all the rest are expressed - derived physical quantities. For the main quantities, units are established, the size of which is agreed upon at the international level, and for the remaining quantities, derived units are formed. The system of units constructed in this way and the units included in it are called coherent, since the condition is met that the ratios between the numerical values of quantities expressed in SI units do not contain coefficients that are different from those included in the initially chosen equations connecting the quantities. The coherence of SI units in their application makes it possible to simplify calculation formulas to a minimum by freeing them from conversion factors.

The SI eliminated the plurality of units for expressing quantities of the same kind. So, for example, instead of a large number of pressure units used in practice, the SI unit of pressure is only one unit - the pascal.

The establishment of its own unit for each physical quantity made it possible to distinguish between the concepts of mass (SI unit - kilogram) and force (SI unit - Newton). The concept of mass should be used in all cases when we mean the property of a body or substance that characterizes their inertia and ability to create a gravitational field, the concept of weight - in cases where we mean the force arising from interaction with the gravitational field.

Definition of basic units. And it is possible with a high degree of accuracy, which ultimately not only improves the accuracy of measurements, but also ensures their unity. This is achieved by "materialization" of units in the form of standards and transfer from them to working measuring instruments with the help of a set of exemplary measuring instruments.

The international system of units, due to its advantages, has become widespread in the world. At present, it is difficult to name a country that would not implement the SI, would be at the stage of implementation or would not make a decision on the implementation of the SI. Thus, countries that previously used the English system of measures (England, Australia, Canada, the USA, etc.) also adopted the SI.

Consider the structure of the construction of the International System of Units. Table 1.1 shows the basic and additional SI units.

SI derived units are formed from basic and supplementary units. SI derived units with special names (Table 1.2) can also be used to form other SI derived units.

Due to the fact that the range of values of most measured physical quantities can now be very significant and it is inconvenient to use only SI units, since the measurement results in too large or small numerical values, the SI provides for the use of decimal multiples and fractions of SI units , which are formed with the help of multipliers and prefixes given in Table 1.3.

International unit

On October 6, 1956, the International Committee of Weights and Measures considered the recommendation of the commission on the system of units and made the following important decision, completing the work on establishing the International System of Units of Measurement:

"The International Committee for Weights and Measures, Having regard to the task received from the Ninth General Conference on Weights and Measures in its Resolution 6, concerning the establishment of a practical system of units of measurement which could be adopted by all countries signatory to the Metric Convention; having regard to all documents , received from 21 countries responding to the survey proposed by the Ninth General Conference on Weights and Measures, taking into account Resolution 6 of the Ninth General Conference on Weights and Measures establishing the choice of base units for the future system, recommends:

1) to be called the "International System of Units" a system based on the base units adopted by the Tenth General Conference, which are as follows;

2) that the units of this system listed in the following table apply, without prejudice to other units that may be added subsequently."

At its session in 1958, the International Committee for Weights and Measures discussed and decided on a symbol for the abbreviation of the name "International System of Units". A symbol consisting of two letters SI (the initial letters of the words System International) was adopted.

In October 1958, the International Committee of Legal Metrology adopted the following resolution on the issue of the International System of Units:

metric system measure weight

"The International Committee of Legal Metrology, meeting in plenary session on October 7, 1958 in Paris, announces its accession to the resolution of the International Committee of Weights and Measures on the establishment of an international system of units of measurement (SI).

The main units of this system are:

meter - kilogram-second-ampere-degree Kelvin-candle.

In October 1960, the issue of the International System of Units was considered at the Eleventh General Conference on Weights and Measures.

On this issue, the conference adopted the following resolution:

"The Eleventh General Conference on Weights and Measures, Bearing in mind Resolution 6 of the Tenth General Conference on Weights and Measures, in which it adopted six units as the basis for establishing a practical system of measurement for international relations, Bearing in mind Resolution 3 adopted by the International Committee of Measures and weights in 1956, and taking into account the recommendations adopted by the International Committee of Weights and Measures in 1958, concerning the abbreviation of the system name and prefixes for the formation of multiples and submultiples, decides:

1. Assign the name "International System of Units" to the system based on six basic units;

2. Set the international abbreviation for this system "SI";

3. Form the names of multiple and submultiple units using the following prefixes:

4. Use the following units in this system without prejudice to what other units may be added in the future:

The adoption of the International System of Units was an important progressive act that summed up many years of preparatory work in this direction and summarized the experience of the scientific and technical circles of different countries and international organizations in metrology, standardization, physics and electrical engineering.

The decisions of the General Conference and the International Committee for Weights and Measures on the International System of Units are taken into account in the recommendations of the International Organization for Standardization (ISO) on units of measurement and are already reflected in the legislative provisions on units and in the unit standards of some countries.

In 1958, the GDR approved a new Regulation on units of measurement, built on the basis of the International System of Units.

In 1960, in the governmental regulation on units of measurement of the Hungarian People's Republic, the International System of Units was adopted as the basis.

State standards of the USSR for units 1955-1958. were built on the basis of the system of units adopted by the International Committee for Weights and Measures as the International System of Units.

In 1961, the Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR approved GOST 9867 - 61 "International System of Units", which establishes the preferred use of this system in all areas of science and technology and in teaching.

In 1961, by government decree, the International System of Units was legalized in France and in 1962 in Czechoslovakia.

The international system of units was reflected in the recommendations of the International Union of Pure and Applied Physics, adopted by the International Electrotechnical Commission and a number of other international organizations.

In 1964, the International System of Units formed the basis of the "Table of Units of Legal Measurement" of the Democratic Republic of Vietnam.

Between 1962 and 1965 in a number of countries, laws have been issued to adopt the International System of Units as mandatory or preferred, and standards for SI units.

In 1965, in accordance with the instructions of the XII General Conference on Weights and Measures, the International Bureau of Weights and Measures conducted a survey on the status of the adoption of the SI in countries that had acceded to the Metric Convention.

13 countries have adopted the SI as mandatory or preferred.

In 10 countries, the use of the International System of Units is admitted and preparations are underway for the revision of laws in order to give a legal, mandatory character to this system in this country.

In 7 countries, SI is admitted as optional.

At the end of 1962, a new recommendation of the International Commission on Radiological Units and Measurements (ICRU) was published, devoted to quantities and units in the field of ionizing radiation. Unlike the previous recommendations of this commission, which were mainly devoted to special (non-systemic) units for measuring ionizing radiation, the new recommendation includes a table in which the units of the International System are placed in the first place for all quantities.

At the seventh session of the International Committee of Legal Metrology, which took place on October 14-16, 1964, which included representatives of 34 countries that signed the intergovernmental convention establishing the International Organization of Legal Metrology, the following resolution was adopted on the implementation of the SI:

"The International Committee of Legal Metrology, taking into account the need for the rapid spread of the International System of Units of SI, recommends the preferred use of these SI units in all measurements and in all measuring laboratories.

In particular, in temporary international recommendations. adopted and disseminated by the International Conference of Legal Metrology, these units should preferably be used for the calibration of measuring apparatus and instruments to which these recommendations apply.

Other units permitted by these recommendations are only temporarily permitted and should be avoided as soon as possible."

The International Committee of Legal Metrology has established a rapporteur secretariat on Units of Measurement whose task is to develop a model draft legislation on units of measurement based on the International System of Units. Austria has taken over the rapporteur secretariat for this topic.

Benefits of the International System

The international system is universal. It covers all areas of physical phenomena, all branches of technology and the national economy. The international system of units organically includes such private systems that have long been widespread and deeply rooted in technology, such as the metric system of measures and the system of practical electrical and magnetic units (ampere, volt, weber, etc.). Only the system that included these units could claim recognition as universal and international.

The units of the International System are for the most part quite convenient in size, and the most important of them have practical names of their own.

The construction of the International System corresponds to the modern level of metrology. This includes the optimal choice of basic units, and in particular their number and size; consistency (coherence) of derived units; rationalized form of electromagnetism equations; the formation of multiples and submultiples by means of decimal prefixes.

As a result, various physical quantities in the International System, as a rule, have different dimensions. This makes a full-fledged dimensional analysis possible, preventing misunderstandings, for example, when checking calculations. Dimension indicators in SI are integer, not fractional, which simplifies the expression of derived units through basic ones and, in general, operating with dimensions. The coefficients 4n and 2n are present in those and only those equations of electromagnetism that relate to fields with spherical or cylindrical symmetry. The method of decimal prefixes, inherited from the metric system, makes it possible to cover huge ranges of changes in physical quantities and ensures that the SI complies with the decimal system.

The international system is inherently flexible. It allows the use of a certain number of non-systemic units.

SI is a living and developing system. The number of basic units can be further increased if necessary to cover any additional area of phenomena. In the future, it is also possible that some of the regulatory rules in force in the SI will be relaxed.

The international system, as its very name says, is intended to become the only system of units of physical quantities universally used. The unification of units is a long overdue necessity. Already, the SI has made numerous systems of units unnecessary.

The international system of units is adopted by more than 130 countries around the world.

The International System of Units is recognized by many influential international organizations, including the United Nations Educational, Scientific and Cultural Organization (UNESCO). Among those who recognized the SI are the International Organization for Standardization (ISO), the International Organization of Legal Metrology (OIML), the International Electrotechnical Commission (IEC), the International Union of Pure and Applied Physics, etc.

Bibliography

1. Burdun, Vlasov A.D., Murin B.P. Units of physical quantities in science and technology, 1990

2. Ershov V.S. Implementation of the International System of Units, 1986.

3. Kamke D, Kremer K. Physical bases of units of measurement, 1980.

4. Novosiltsev. On the history of the basic SI units, 1975.

5. Chertov A.G. Physical quantities (Terminology, definitions, designations, dimensions), 1990.

Hosted on Allbest.ru